Cisco Catalyst 9500 series Configuration Manual page 77

Configuring IP Unicast Routing
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
interface interface-id
Example:
Device(config)# interface
gigabitethernet 1/0/2
ip proxy-arp
Example:
Device(config-if)# ip proxy-arp
end
Example:
Device(config)# end
show ip interface [interface-id]
Example:
Device# show ip interface
gigabitethernet 1/0/2
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Configuring Address Resolution Methods
Purpose
Enables privileged EXEC mode. Enter your
password if prompted.
Enters the global configuration mode.
Enters interface configuration mode, and
specifies the Layer 3 interface to configure.
Enables proxy ARP on the interface.
Returns to privileged EXEC mode.
Verifies the configuration on the interface or
all interfaces.
(Optional) Saves your entries in the
configuration file.
67