Configuring An Msdp Mesh Group - Cisco Catalyst 3850 series Configuration Manual

Configuring MSDP
Before You Begin
An MSDP default peer must be a previously configured MSDP peer. Before configuring a default MSDP
peer, you must first configure an MSDP peer.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp default-peer {peer-address | peer-name} [prefix-list list]
4. exit
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 ip msdp default-peer {peer-address | peer-name}
[prefix-list list]
Example:
Device(config)# ip msdp default-peer 192.168.1.3
Step 4 exit
Example:
Device(config)# exit
Related Topics
Default MSDP Peers, on page 205
Example: Configuring a Default MSDP Peer, on page 236

Configuring an MSDP Mesh Group

Perform this optional task to configure an MSDP mesh group.
OL-32598-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
Configuring an MSDP Mesh Group
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures a default peer from which to accept all MSDP
SA messages
Exits global configuration mode and returns to privileged
EXEC mode.
219