The Configuration Menu - Honeywell Touchpoint Plus Technical Handbook

6.1.2 The Configuration Menu

The Configuration Menu contains all of the basic system settings that are entered on installation / commissioning. It should
not need updating unless there are changes to the system or requirements. Access is restricted to Service or Admin users.
Menu Level 1
Configuration
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Commissioning
Menu Level 2
Channel Settings Channel Number Select
Module Control Panel Module Select
Date / Time
Language
Service Contact
General
Home Settings
Timeout
Log Threshold
Log Interval and
Threshold
Log Interval
LCD Backlight Timeout
Display LCD Backlight Brightness
Touch Panel Calibration
Dedicated Alarm
Contacts
Outputs
Buzzer Options
Password
Security
Remote Access
Import
Config Manager
Export
Ethernet
Network
Modbus RTU
Figure 45. Configuration Menu
Menu Level 3
Remove
Enable
Disable
Select (3 windows)>Edit>Review>Apply>Update
Refresh
Add
Remove
Replace
Change
Change
Change
Default Home screen layout
Menu Timeout (5 – 100 Sec)
Authentication Timeout (15 – 100 Min)
Enter %FSD
Enter Seconds
Enter Seconds
Enter %
Wizard
Dedicated Audible Alarm 1 (1/2/3)
Dedicated Audible Alarm 2 (1/2/3)
Buzzer Option (Enable / Disable)
Activation on Warning (Enable / Disable)
Change / Reset (per user)
Remote Reset/Acknowledge (Enable / Disable)
Remote Inhibit (Enable / Disable)
Remote Inhibit Setting (NO / NC)
Per Channel (Update File required)
Keyboard (Input File Name) / Wizard
DHCP / SIP Address (Keyboard)
Address Settings (Keyboard) Baud, Parity, D-Bits
46
Menu Level 4
Touchpoint Plus
Technical Handbook