Chapter 3. System General Description - Honeywell Touchpoint Plus Technical Handbook

Chapter 3. System General Description

The Touchpoint Plus is an entry level (or upgrade) touch-screen digital Controller for general industrial and commercial
gas detection systems. It has eight input channels, with a further eight channels available through an optional expansion
unit (see Note below).
It can handle a wide range of milliamp, millivolt, and catalytic sensors through analogue inputs, and it can control various
outputs such as audible and visible signals and solenoid valves.
The cabinets are constructed from high-impact plastic and have fully-sealed, easy opening access. They are supplied with
a wall mounting or can be directly mounted to any solid vertical surface or rack. Cable entry is via entry glands on the
lower side.
Touchpoint Plus is rated IP65, which means that it is dustproof and can be subjected to low-pressure water without
significant ingress. This makes it particularly suited to offices, control rooms and unheated boiler rooms.
Note: Currently Touchpoint Plus is only available as a composite Gas Detection System, but please contact Honeywell
Analytics for details about future upgrades.
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
System General Description
Figure 6. Touchpoint Plus Wall-Mounted Controller
Relays / Actuators
SD Card
mA Loop Sensors
Figure 7. Typical Installation Options
mA Loop
Audio / Visual Alarm
mV Bridge Sensors
13
Touchpoint Plus
Technical Handbook