The Maintenance Menu - Honeywell Touchpoint Plus Technical Handbook

6.1.3 The Maintenance Menu

The Maintenance Menu is where commissioning and maintenance tasks can be accessed. Most of this menu is available
to Service Engineers, but Service Mode and system updates can only be authorised by the Administrator.
Menu Level 1
Maintenance
6.1.4 System Test Menu
This menu allows a Service Engineer to test / emulate various system functions. Access is restricted to Service or Admin
users
Menu Level 1
System Test
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Commissioning
Menu Level 2
Reset alarms / Faults Yes / No
Reset All Peaks Yes / No
Gas Calibration Wizard
Adjust mV Baseline Wizard
SD Card Format / Eject
Power Off Yes / No
Electronic Adjustment
Service Mode
Safety Function
(Administrator)
Reset to Default
Software
Language
Update System
(Administrator)
Sensor Catalog
Module Data
Figure 46. Maintenance Menu
Menu Level 2
Force Relay Module Select
Channel to Force (All /
Force 4 – 20mA
Single)
Relay C&E Matrix Select Relay Channel
Visible Alarm
Audible Alarm 1
Dedicated Alarm
Contacts
Audible Alarm 2
Audible Alarm 3
Figure 47. System Test Menu
Menu Level 3
N/A
N/A
N/A
N/A
N/A
N/A
Requires multi-meter and technical skills
Enable / Disable
Yes / No
Update File required
Update File required
Update File required
Update File required
Menu Level 3
System / Channel (On/Off)
New Output Value ( in mA)
Input Select Auto-fill (A1, A2, A3, FLT, INHIB,
WARN)
Input Channel (Selective Inputs - Scrollable)
Vote Count Summary
Channels Selected Summary
On / Off
On / Off
On / Off
On / Off
47
Menu Level 4
Menu Level 4
Touchpoint Plus
Technical Handbook