Honeywell Touchpoint Plus Technical Handbook page 70

8) Then touch [Next] again to change more settings:
Note: Touch the [Alarm Function] boxes to open a dialog box for Threshold, STEL or TWA choices.
9) Then touch [Next] again to change more settings:
10) Then touch [Next] again to change more settings:
Note: The default TWA Interval is based on an average 8-hour working shift so that the next shift always starts the plot
with zero exposure. You should change the hours if your regular shift pattern is longer or shorter (e.g. 6 / 12 / 24 hrs etc.).
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Commissioning
62
Touchpoint Plus
Technical Handbook