7.4 Menu Items and Access Levels
The table below details the menu items and access levels for the User Interface. The password hierarchy is Administrator,
then Service, then Operator. Broadly speaking, the Administrator can do everything, the Service Engineer can edit
channel configuration and do maintenance and calibration, and the Operator can view, acknowledge and reset events.
(Viewing basic System Information and Status does not require a password.)
A user can log in by touching the log in icon, selecting an access level and then inputting a valid password.
Note: Default Authentication timeout follows 15 minutes of inactivity. For security reasons do not leave the Touchscreen
unattended while logged in.
There are two kinds of timeout in menu mode. One is 'menu timeout' and the other is 'authentication time out'.
With 'menu timeout', the display will change to a higher menu and then back to the Channel Status screen if there is no
touch input for a pre-set time. The default menu timeout is 90 seconds, but this can be changed using menu options
Configuration>General>Timeout
For security reasons 'authentication timeout' will log you out automatically when there is no Touchscreen activity during
the set time. Changes may be lost and the user will have to log in again.
Items with a clock symbol timeout after 15 minutes of inactivity.
= Allowed, = Denied, = Fixed timeout.
Key:
= sub-menu,
Login
System Info
Summary Info
Software Info
Parameter Info
Event History
Filter View
Export History
Trend/Plot
Channel Info
Board Info
Relay Status
Additional Status
Service Contract
Event History
Channel View Home
List View
Tile View
Summary View
Output View
Configuration
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Operating Instructions
.
= sub-sub-menu
Menu Item
Menu Home
Information
Admin.
Service
77
Operator
Others
Technical Handbook
Touchpoint Plus