Oil Pressure Below Minimum Value - Rotax MML-912 Maintenance Manual

3.6)

Oil pressure below minimum value

General note
NOTES:
Overview and instruction
Graphic
0,5 bar
(7.25 psi)
Fig. 4
Oil pressure below minimum oil pressure on the ground
Minimum oil pres-
sure on the
If noticed on ground, immediately stop the engine and determine the
ground
cause.
- Inspect the complete lubrication system, trace cause and rectify. See
Effectivity: 912 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
If the oil pressure falls below the minimum value, other
NOTICE
WARNUNG
limits are often exceeded, e.g. the oil temperature.
Please observe the relevant instructions.
Any exceeding of the min. admissible oil pressure must be
entered by the pilot into the engine log book, stating dura-
tion extent of excessive pressure and pertinent details.
Oil pressure
Proceed as
instructed in
table 5
Proceed as
instructed in table 6
SI-912-005, latest issue.
Operating limit (minimum value)
(See Operators Manual 912 Series)
1 min.
Time
07188
05-50-00
page 15
October 01/2009