Calibration; Developer Refresh - Kyocera 7002i Operation Manual

Troubleshooting > Adjustment/Maintenance

Calibration

Calibrate the device to ensure consistency with the original tone.
1
2

Developer Refresh

Adjust the printed image that is too light or incomplete, even though there is enough toner.
1
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Calibration" [Next]
Perform the calibration.
Select [Start]. "Calibration" begins.
NOTE
When consistency with the original tone is not ensured even after performing calibration,
refer to the following:
Tone Curve Adjustment (page 10-39)
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Developer Refresh" [Next]
Perform the Developer Refresh.
Select [Start]. "Developer Refresh" begins.
NOTE
Waiting time may be longer when the toner is refilled during developer refresh.
10-42