Pim Configuration Examples; Pim-Dm Configuration Example - HP VSR1000 Configuration Manual

Task
Display PIM routing entries.
Display RP information in the
PIM-SM domain.
Display statistics for PIM packets.
Display remote end information
maintained by PIM for ADVPN
tunnel interfaces.

PIM configuration examples

PIM-DM configuration example

Network requirements
As shown in
•
OSPF runs on the network.
•
VOD streams are sent to receiver hosts in multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist on each stub network.
•
The entire PIM domain operates in the dense mode.
•
Host A and Host C are multicast receivers on two stub networks N1 and N2.
•
IGMPv2 runs between Router A and N1, and between Router B, Router C, and N2.
Figure 43:
Command
display pim [ vpn-instance vpn-instance-name ] routing-table
[ group-address [ mask { mask-length | mask } ] | source-address
[ mask { mask-length | mask } ] | flags flag-value | fsm |
incoming-interface interface-type interface-number | mode
mode-type | outgoing-interface { exclude | include | match }
interface-type interface-number | proxy ] *
display pim [ vpn-instance vpn-instance-name ] rp-info
[ group-address ]
display pim statistics
display pim [ vpn-instance vpn-instance-name ] nbma-link
[ interface { interface-type interface-number } ]
112