HP VSR1000 Configuration Manual page 79

[RouterA-portal-server-spec] ip 10.110.5.2 key simple 123456
[RouterA-portal-websvr-spec] quit
# On the RADIUS server, configure the user accounts with the same usernames, passwords,
and IP addresses as those on the RADIUS client. (Details not shown.)
# On the IMC server, configure the IP address group for users. Specify the next hop of the
default route to users as 11.110.5.1. Specify the same passwords and IP addresses for users
as those on the IMC client. (Details not shown.)
# On Host A and Host B, specify the next hop of the default route to the IMC server as
192.168.1.1. (Details not shown.)
# On Host C and Host D, specify the next hop of the default route to the IMC server as
192.168.2.1. (Details not shown.)
# Create an ISP domain named isp1, and specify the STB service for users in the ISP domain.
[RouterA] domain isp1
[RouterA-isp-isp1] service-type stb
# Configure AAA methods for ISP domain isp1.
[RouterA-isp-isp1] authentication portal radius-scheme spec
[RouterA-isp-isp1] authorization portal radius-scheme spec
[RouterA-isp-isp1] accounting portal radius-scheme spec
[RouterA-isp-isp1] quit
# Create an ISP domain named isp2, and specify the STB service for users in the ISP domain.
[RouterA] domain isp2
[RouterA-isp-isp2] service-type stb
# Configure AAA methods for ISP domain isp2.
[RouterA-isp-isp2] authentication portal radius-scheme spec
[RouterA-isp-isp2] authorization portal radius-scheme spec
[RouterA-isp-isp2] accounting portal radius-scheme spec
[RouterA-isp-isp2] quit
# Configure the portal service on GigabitEthernet 1/0/5.
[RouterA] interface gigabitethernet 1/0/5
[RouterA-GigabitEthernet1/0/5] portal enable method direct
[RouterA-GigabitEthernet1/0/5] portal domain isp2
[RouterA-GigabitEthernet1/0/5] portal apply web-server spec
[RouterA-GigabitEthernet1/0/5] quit
# Configure the portal service on GigabitEthernet 1/0/6.
[RouterA] interface gigabitethernet 1/0/6
[RouterA-GigabitEthernet1/0/6] portal enable method direct
[RouterA-GigabitEthernet1/0/6] portal domain isp1
[RouterA-GigabitEthernet1/0/6] portal apply web-server spec
[RouterA-GigabitEthernet1/0/6] quit
Configure multicast access control on the BRAS:
5.
# Enable IGMP, multicast access control, and per-session multicast forwarding on
GigabitEthernet 1/0/5.
[RouterA] interface gigabitethernet 1/0/5
[RouterA-GigabitEthernet1/0/5] igmp enable
[RouterA-GigabitEthernet1/0/5] igmp authorization-enable
[RouterA-GigabitEthernet1/0/5] igmp join-by-session
[RouterA-GigabitEthernet1/0/5] quit
71