HP VSR1000 Configuration Manual page 314

Figure 94 Network diagram
Table 27 Interface and IPv6 address assignment
Device
Router A
Router A
Router B
Router B
Router C
Configuration procedure
Assign an IPv6 address and prefix length to each interface, as shown in
1.
shown.)
Configure OSPFv3 on the routers in the IPv6 PIM-DM domain. (Details not shown.)
2.
Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM:
3.
# On Router A, enable IPv6 multicast routing.
<RouterA> system-view
[RouterA] ipv6 multicast routing
[RouterA-mrib6] quit
# Enable MLD on GigabitEthernet 1/0/1 (the interface that connects to the stub network).
[RouterA] interface gigabitethernet 1/0/1
[RouterA-GigabitEthernet1/0/1] mld enable
[RouterA-GigabitEthernet1/0/1] quit
# Enable IPv6 PIM-DM on GigabitEthernet 1/0/2.
[RouterA] interface gigabitethernet 1/0/2
[RouterA-GigabitEthernet1/0/2] ipv6 pim dm
[RouterA-GigabitEthernet1/0/2] quit
Interface IPv6 address
GE1/0/1 1001::1/64
GE1/0/2 1002::1/64
GE1/0/1 2001::1/64
GE1/0/2 2002::1/64
GE1/0/1 2001::2/64
Device Interface
Router C GE1/0/2
Router D GE1/0/1
Router D GE1/0/2
Router D GE1/0/3
Router D GE1/0/4
306
IPv6 address
3001::1/64
4001::1/64
1002::2/64
2002::2/64
3001::2/64
Figure 94. (Details not