Ipv6 Multicast Access Control Configuration Example (For Pppoe) - HP VSR1000 Configuration Manual

GigabitEthernet1/0/1(FE80::16:1):
MLD proxy group records in total: 1
Group address: FF3E::101
Member state: Delay
Expires: 00:00:02
IPv6 multicast access control configuration example (for
PPPoE)
As shown in
•
OSPF runs in the PIM-SM domain.
•
Source 1, Source 2, and Source 3 send IPv6 multicast data to IPv6 multicast groups FF1E::101,
FF1E::102, and FF1E::103, respectively.
•
GigabitEthernet 1/0/2 on Router A acts as a C-BSR and a C-RP, and it is designated to all IPv6
multicast groups.
•
Router A acts as the BRAS, and it connects the users in ISP 1 and ISP 2 to the PIM-SM
network.
Configure the IPv6 multicast access control feature on Router A to meet the following requirements:
•
Host A and Host B in ISP 1 can join only IPv6 multicast groups FF1E::101 and FF1E::102.
•
Host C and Host D in ISP 2 can join only IPv6 multicast groups FF1E::102 and FF1E::103.
Figure 77 Network diagram
Source 1
GE1/0/2
Router B
IPv6 PIM-SM
ISP 1
Host A
User1@ISP1
Figure 77:
Source 2
GE1/0/2
GE1/0/1
BRAS
Router A
Access
network
Host B
User2@ISP1
Source 3
GE1/0/2
Router C
Router D
RADIUS server
GE1/0/4
ISP 2
Access
network
Host C Host D
User1@ISP2 User2@ISP2
252