HP VSR1000 Configuration Manual page 272

[RouterA-portal-server-spec] ipv6 2005::2 key simple 123456
[RouterA-portal-websvr-spec] quit
# On the RADIUS server, configure the user accounts with the same usernames, passwords,
and IPv6 addresses as those on the RADIUS client. (Details not shown.)
# On the IMC server, configure the IPv6 address group for users. Specify the next hop of the
default route to users as 2005::1, and specify the same passwords and IPv6 addresses for
users as those on the IMC client. (Details not shown.)
# On Host A and Host B, specify the next hop of the default route to the IMC server as 3001::1.
(Details not shown.)
# On Host C and Host D, specify the next hop of the default route to the IMC server as 3002::1.
(Details not shown.)
# Create an ISP domain named isp1, and specify the STB service for users in the ISP domain.
[RouterA] domain isp1
[RouterA-isp-isp1] service-type stb
# Configure AAA methods for ISP domain isp1.
[RouterA-isp-isp1] authentication portal radius-scheme spec
[RouterA-isp-isp1] authorization portal radius-scheme spec
[RouterA-isp-isp1] accounting portal radius-scheme spec
[RouterA-isp-isp1] quit
# Create an ISP domain named isp2, and specify the STB service for users in the ISP domain.
[RouterA] domain isp2
[RouterA-isp-isp2] service-type stb
# Configure AAA methods for ISP domain isp2.
[RouterA-isp-isp2] authentication portal radius-scheme spec
[RouterA-isp-isp2] authorization portal radius-scheme spec
[RouterA-isp-isp2] accounting portal radius-scheme spec
[RouterA-isp-isp2] quit
# Configure the portal service on GigabitEthernet 1/0/5.
[RouterA] interface gigabitethernet 1/0/5
[RouterA-GigabitEthernet1/0/5] portal ipv6 enable method direct
[RouterA-GigabitEthernet1/0/5] portal ipv6 domain isp2
[RouterA-GigabitEthernet1/0/5] portal ipv6 apply web-server spec
[RouterA-GigabitEthernet1/0/5] quit
# Configure the portal service on GigabitEthernet 1/0/6.
[RouterA] interface gigabitethernet 1/0/6
[RouterA-GigabitEthernet1/0/6] portal ipv6 enable method direct
[RouterA-GigabitEthernet1/0/6] portal ipv6 domain isp1
[RouterA-GigabitEthernet1/0/6] portal ipv6 apply web-server spec
[RouterA-GigabitEthernet1/0/6] quit
Configure IPv6 multicast access control on the BRAS:
5.
# Enable MLD, IPv6 multicast access control, and per-session IPv6 multicast forwarding on
GigabitEthernet 1/0/5.
[RouterA] interface gigabitethernet 1/0/5
[RouterA-GigabitEthernet1/0/5] mld enable
[RouterA-GigabitEthernet1/0/5] mld authorization-enable
[RouterA-GigabitEthernet1/0/5] mld join-by-session
[RouterA-GigabitEthernet1/0/5] quit
264