Enabling Nbma Mode For Ipv6 Advpn Tunnel Interfaces; Displaying And Maintaining Ipv6 Pim - HP VSR1000 Configuration Manual

Step
Enable SNMP notifications
2.
for IPv6 PIM.

Enabling NBMA mode for IPv6 ADVPN tunnel interfaces

This feature allows IPv6 ADVPN tunnel interfaces to forward IPv6 multicast data to target spokes
and hubs. For more information about ADVPN, see Layer 3
Configuration restrictions and guidelines
When you enable NBMA mode, follow these restrictions and guidelines:
•
This feature is not available for IPv6 PIM-DM.
•
This feature takes effect only when IPv6 PIM-SM is enabled.
•
In an IPv6 BIDIR-PIM domain, make sure RPs do not reside on IPv6 ADVPN tunnel interfaces
or on the subnet where IPv6 ADVPN tunnel interfaces are located.
•
Do not configure MLD features on IPv6 ADVPN tunnel interfaces that are enabled with NBMA
mode.
Configuration procedure
To enable NBMA mode for an ADVPN tunnel interface:
Step
Enter system view.
1.
Enter interface view.
2.
Enable NBMA mode.
3.

Displaying and maintaining IPv6 PIM

Execute display commands in any view.
Task
Display register-tunnel interface
information.
Display BSR information in the
IPv6 PIM-SM domain.
Display information about the
routes used by IPv6 PIM.
Display C-RP information in the
IPv6 PIM-SM domain.
Display DF information in the IPv6
BIDIR-PIM domain.
Command
snmp-agent trap enable pim6
[ candidate-bsr-win-election |
elected-bsr-lost-election |
neighbor-loss ] *
Command
system-view
interface interface-type
interface-number
ipv6 pim nbma-mode
Command
display interface [ register-tunnel [ interface-number ] ] [ brief
[ description| down ] ]
display ipv6 pim [ vpn-instance vpn-instance-name ] bsr-info
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route
[ ipv6-source-address ]
display ipv6 pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
display ipv6 pim [ vpn-instance vpn-instance-name ] df-info
[ ipv6-rp-address ]
304
Remarks
By default, SNMP notifications for
IPv6 PIM are enabled.
—
IP Services Configuration Guide.
Remarks
N/A
N/A
By default, NBMA mode is
disabled.
This command is applicable only
to IPv6 ADVPN tunnel interfaces.