HP VSR1000 Configuration Manual page 207

Item
IP multicast routing
IGMPv2
PIM-SM
MSDP
Figure 65 Network diagram
Table 20 Interface and IP address assignment
Device Interface
S 1
—
S 2
—
PE 1 GE1/0/1
PE 1 GE1/0/2
Network requirements
•
Enable IP multicast routing on the public network on PE 1, PE 2, PE 3, and PE 4.
•
Enable IP multicast routing for VPN instance a on PE 1 and PE 4.
•
Enable IP multicast routing for VPN instance b on PE 1 and PE 4.
•
Enable IP multicast routing on CE a1, CE a2, CE b1, and CE b2.
•
Enable IGMPv2 on GigabitEthernet 1/0/1 of CE a2.
•
Enable IGMPv2 on GigabitEthernet 1/0/1 of CE b2.
Enable PIM-SM on the public network and for VPN instances a and b:
•
Enable PIM-SM on all public network interfaces of PE 2 and PE 3.
•
Enable PIM-SM on all public and private network interfaces of PE 1 and PE 4.
•
Enable PIM-SM on all interfaces that do not have attached receiver hosts on CE
a1, CE a2, CE b1, and CE b2.
•
Configure Loopback 2 of PE 2 and PE 3 as a C-BSR and a C-RP for their own AS
to provide services for all multicast groups.
•
Configure Loopback 0 of CE a1 as a C-BSR and a C-RP for VPN instance a to
provide services for all multicast groups.
•
Configure Loopback 0 of CE b1 as a C-BSR and a C-RP for VPN instance b to
provide services for all multicast groups.
Establish an MSDP peering relationship between PE 2 and PE 3 on their Loopback 1.
IP address
10.11.5.2/24
10.11.6.2/24
10.10.1.1/24
10.11.1.1/24
199
Device Interface
R 1 —
R 2 —
GE1/0/1
PE 3
GE1/0/2
PE 3
IP address
10.11.8.2/24
10.11.7.2/24
10.10.2.1/24
192.168.1.2/24