HP VSR1000 Configuration Manual page 327

[RouterC-GigabitEthernet1/0/2] quit
[RouterC] interface loopback 0
[RouterC-LoopBack0] ipv6 pim sm
[RouterC-LoopBack0] quit
[RouterC] ipv6 pim
[RouterC-pim6] bidir-pim enable
# On Router D, enable IPv6 multicast routing.
<RouterD> system-view
[RouterD] ipv6 multicast routing
[RouterD-mrib6] quit
# Enable MLD on the receiver-side interface (GigabitEthernet 1/0/1).
[RouterD] interface gigabitethernet 1/0/1
[RouterD-GigabitEthernet1/0/1] mld enable
[RouterD-GigabitEthernet1/0/1] quit
# Enable IPv6 PIM-SM on the other interfaces.
[RouterD] interface gigabitethernet 1/0/2
[RouterD-GigabitEthernet1/0/2] ipv6 pim sm
[RouterD-GigabitEthernet1/0/2] quit
[RouterD] interface gigabitethernet 1/0/3
[RouterD-GigabitEthernet1/0/3] ipv6 pim sm
[RouterD-GigabitEthernet1/0/3] quit
# Enable IPv6 BIDIR-PIM.
[RouterD] ipv6 pim
[RouterD-pim6] bidir-pim enable
[RouterD-pim6] quit
On Router C, configure GigabitEthernet 1/0/1 as the C-BSR, and Loopback 0 as the C-RP for
4.
the entire IPv6 BIDIR-PIM domain.
[RouterC-pim6] c-bsr 2002::2
[RouterC-pim6] c-rp 6001::1 bidir
[RouterC-pim6] quit
Verifying the configuration
Display the DF information of BIDIR-PIM:
1.
# Display the DF information of IPv6 BIDIR-PIM on Router A.
[RouterA] display ipv6 pim df-info
RP address: 6001::1
Interface
GE1/0/1
GE1/0/2
# Display the DF information of IPv6 BIDIR-PIM on Router B.
[RouterB] display ipv6 pim df-info
RP address: 6001::1
Interface
GE1/0/1
GE1/0/2
State DF-Pref
Win 100
Lose 100
State DF-Pref
Win 100
Win 100
319
DF-Metric DF-Uptime DF-Address
2 01:08:50
1 01:07:49
DF-Metric DF-Uptime DF-Address
1 01:24:09
1 01:24:09
FE80::200:5EFF:
FE71:2800 (local)
FE80::20F:E2FF:
FE38:4E01
FE80::200:5EFF:
FE71:2801 (local)
FE80::20F:E2FF: