Downloading The Netbackup Administration Console To A Windows Computer From A Netbackup Appliance - VERITAS NetBackup 5330 Configuration Manual

Downloading the NetBackup Administration Console to a Windows computer from a NetBackup Appliance

Downloading the NetBackup Administration
Console to a Windows computer from a
NetBackup Appliance
You can download the NetBackup Administration Console software from a
NetBackup Appliance to a Windows computer that you want to use to access the
appliance. The Windows computer does not require NetBackup installation to use
the administration console. The logon page of the NetBackup Appliance Web
Console provides a Download Packages section to download the NetBackup
Administration Console package.
In addition to the downloading instructions, this procedure also includes the steps
to extract and install the downloaded files on to the client.
To download the NetBackup Administration Console package from a
NetBackup Appliance appliance to a Windows computer
1
Log into the Windows computer that you want to use for appliance access.
2
Open a browser window and enter the appliance URL.
3
In the middle of the landing page, in the section Download Packages, click
on the drop-down box and select Windows.
4
When the package file name appears under the drop-down box, right-click on
it and select either Download Linked File or Download Linked File As, then
specify the location to download the package onto the Windows computer.
For example, download the package to
5
Unzip the package.
6
Install the administration console software as follows:
On the client, navigate to the
■
Click on the setup.exe file.
■
See "Downloading NetBackup client packages to a client from a NetBackup
Appliance" on page 56.
See "Installing NetBackup client software through CIFS and NFS shares"
on page 60.
Post configuration procedures
or to the desktop.
C:\temp
Addons/JavaInstallFiles
59
directory.