Overview Of The Initial Configuration Pages In The Netbackup Appliance Web Console - VERITAS NetBackup 5330 Configuration Manual

Overview of the initial configuration pages in the
NetBackup Appliance Web Console

Overview of the initial configuration pages in the NetBackup Appliance Web Console

Embedding the IPv4 address within an IPv6 address is not supported. For
■
example, you cannot use an address like 9ffe::10.23.1.5.
You can add an appliance media server to the master server if the IPv6 address
■
and the host name of the appliance media server are available.
For example, to add an appliance media server to the master server, enter the
IPv6 address of the appliance media server as follows:
Example:
Main > Network > Hosts add 9ffe::45 v45 v45
Main > Appliance > Add v45 <password>
You do not need to provide the IPv4 address of the appliance media server.
A pure IPv6 client is supported in the same way as in NetBackup.
■
You can enter only one IPv4 address for a network interface card (NIC) or bond.
■
However, you can enter multiple IPv6 addresses for a NIC or bond.
Network File System (NFS) or Common Internet File System (CIFS) protocols
■
are supported over an IPv4 network on appliance. NFS or CIFS are not supported
on IPv6 networks.
The NetBackup client can now communicate with the media server appliance
■
over IPv6.
The
■
Main_Menu > Network > Hosts
to be assigned to the same host name having one network interface card (NIC).
However, only one IPv4 address can be assigned to a specific host name having
one NIC using this command.
You can add an IPv6 address of a network interface without specifying a gateway
■
address.
For more details, see the NetBackup Appliance Command Reference Guide.
The NetBackup Appliance Web Console lets you perform the initial configuration
through a series of pages where you enter the appropriate information. The following
shows each page along with a brief description of the required information.
Welcome to Appliance Setup
This page appears when you log on to an appliance that is not configured. It provides
a short summary of the necessary information for the initial configuration.
Preparing for initial configuration
command supports multiple IPv6 addresses
10