VERITAS NetBackup 5330 Configuration Manual page 22

IPMI port configuration
IPMI port configuration is separate from the initial configuration. To use this port
for remote access to the appliance, you must first configure it for connectivity to
your network. Use the following table to record the required parameter settings.
IPMI port configuration
Table 1-2
Parameter
IP Address
Netmask
Gateway IP Address
Appliance initial configuration
The following tables identify the fields that appear on the initial configuration pages
in the NetBackup Appliance Web Console. Use these tables to record your settings.
Network Configuration - Create Bond
Table 1-3
Field
Network Interface
Bond Mode
IP Address
Subnet Mask
Network Configuration - Tag VLAN
Table 1-4
Field
Select Interface
Description (for Select Interface field above)
VLAN Id
IP Address (IPv4 or IPv6)
Subnet Mask
Preparing for initial configuration
NetBackup appliance initial configuration checklist
Setting
Setting
Setting
22