VERITAS NetBackup 5330 Configuration Manual page 35

Performing the initial configuration on a NetBackup 5330 appliance from the NetBackup Appliance Web Console
For DNS systems:
For the systems
that do not use
DNS:
8
On the Password change page, enter a new password to replace the default
password as follows:
Enter the following Domain Name System information:
Domain Name Suffix
■
Enter the suffix name of the DNS server.
DNS IP Address(es)
■
Enter the IP address of a DNS server, then click the + icon to
add the address. Repeat as necessary for the number of
addresses that you want to add.
The address can be either IPv4 or IPv6. For IPv6 addresses,
only global-scope or unique-local addresses are allowed.
See "About IPv4-IPv6-based network support"
To remove an address, select it from the list that appears below
the data entry field and click the x icon.
Search Domain(s)
■
If required for your environment, enter a search domain name,
then click the + icon to add the name. Repeat as necessary
for the number of search domains that you want to add.
To remove a search domain, select it from the list that appears
below the data entry field and click the x icon.
After you have entered all of the necessary information, click Next.
Enter the following Host name resolution information:
IP
■
Enter the IP address of the appliance.
The address can be either IPv4 or IPv6. For IPv6 addresses,
only global-scope or unique-local addresses are allowed.
See "About IPv4-IPv6-based network support"
Fully qualified host name
■
Enter the fully qualified host name (FQHN) of the appliance.
Short host name
■
Enter the short name of the appliance.
To enter two or more names, add a comma with no space
between each name.
After you have populated all fields, click the + icon. The added
entries now appear below the fields.
After you have entered all of the necessary information, click Next.
Initial configuration procedures
on page 9.
on page 9.
35