Configuring The Ipmi Port From The Access Appliance Shell Menu - VERITAS Access 3340 Installation Manual
Appliance hardware
Hide thumbs
Also See for Access 3340:
- Command reference manual (110 pages) ,
- Appliance product description (78 pages) ,
- Configuration manual (70 pages)
Table of Contents
Advertisement
Configuring the IPMI port from the Access
Appliance shell menu
Configuring the IPMI port from the Access Appliance shell menu
Verify that the Power On LED on the control panel on the front of the shelf
■
is green.
7
If you have three Expansion shelves, turn on the third shelf.
Verify that the Power OK LEDs on the power supply modules are green.
■
Verify that the Power On LED on the control panel on the front of the shelf
■
is green.
8
Turn on the Primary Storage Shelf. Verify that the Power OK LEDs on the
power supply modules are green.
Verify that the Power OK LEDs on the power supply modules are green.
■
Verify that the Power On LED on the control panel on the front of the shelf
■
is green.
9
Turn on the compute node with the power button on the front right side.
10
Verify that the LED under the button is green.
This section explains how to configure IPMI from the Access Appliance shell menu.
If you have more than one node in your system you must configure each node's
IPMI port individually.
Hardware installation procedures
71
- Quick Links:
- Connecting to the Network
Hide quick links:
Advertisement
Table of Contents
