VERITAS NetBackup 5330 Configuration Manual page 58

Downloading NetBackup client packages to a client from a NetBackup Appliance
UNIX systems
■
Run the
.install
7
After you have successfully installed the client software, add the appliance
master server name to the client as follows:
Windows systems
After NetBackup has been installed on
■
the client, open the Backup, Archive,
and Restore interface.
Start > All Programs > Veritas
NetBackup > Backup, Archive, and
Restore
From the Backup, Archive, and Restore
■
interface, select File > Specify
NetBackup Machines and Policy
Type...
From the Specify NetBackup
■
Machines and Policy Type dialog,
enter the server name in the field
Server to use for backups and
restores. Then click Edit Server List
and click OK.
In the dialog box that appears, enter
■
the fully qualified host name of the
appliance master server and click OK.
Close the Backup, Archive, and
■
Restore interface.
Restart the NetBackup Client Services
■
by opening a Windows Command
prompt. Then, enter services.msc
and press Enter.
See "Installing NetBackup client software through CIFS and NFS shares"
on page 60.
See "Downloading the NetBackup Administration Console to a Windows computer
from a NetBackup Appliance"
script.
UNIX systems
On the client, navigate to the following
■
location:
cd /usr/openv/netbackup
Enter ls to see the contents of the
■
directory.
Open the bp.conf file in a text editor.
■
Enter the fully qualified host name of
■
the appliance master server.
Save the changes and close the file.
■
on page 59.
Post configuration procedures 58