VERITAS NetBackup 5330 Configuration Manual page 61

Installing NetBackup client software through CIFS and NFS shares
NetBackup UNIX client software installation through an
NFS share
To install NetBackup client software on a UNIX client through an NFS share
1
On the appliance where the client software resides, log on to the NetBackup
Appliance Shell Menu with your administrator credentials.
2
Open the NFS share using the following command:
Main > Settings > Share ClientInstall Open
3
On the UNIX client computer where you want to install the NetBackup client
software, log on as root.
4
Mount the following NFS share:
<appliance_name>:/inst/client
5
Browse the files within the NFS share directory. Files that are similar to the
following appear:
.packages
PC_Clnt
6
Run the
unix-client-install
This action installs the NetBackup client software.
7
Add the appliance master server name to the
follows:
On the client, navigate to the following location:
■
cd /usr/openv/netbackup
Enter to see the contents of the directory.
■ ls
Open the
■ bp.conf
Enter the fully qualified host name of the appliance master server.
■
Save your changes and close the file.
■
8
On the appliance, close the shared directory using the following command:
Main > Settings > Share ClientInstall Close
See "Downloading NetBackup client packages to a client from a NetBackup
Appliance" on page 56.
See "Downloading the NetBackup Administration Console to a Windows computer
from a NetBackup Appliance"
clientconfig
docs
script.
file in a text editor.
on page 59.
Post configuration procedures
quickinstall.exe
unix-client-install
file on the client as
bp.conf
61