VERITAS NetBackup 5330 Configuration Manual page 36

Performing the initial configuration on a NetBackup 5330 appliance from the NetBackup Appliance Web Console
Note: To continue with the initial configuration, you are not required to change
the default password. However, to increase the security of your environment
Veritas recommends that you change the password periodically. Make sure to
keep a record of the current password in a secure location.
Old admin password
New admin password
Confirm new password
After you have entered all of the necessary information, click Next.
9
On the Date & Time page, enter the appropriate date and time for this
appliance. The date and time for this media server must match the date and
time of the associated master server.
You can enter the information manually or use a Network Time Protocol (NTP)
server to synchronize the appliance date and time over the network.
Time zone
Enter the factory default password (P@ssw0rd)
Enter the new password.
Valid passwords must include the following:
Eight or more characters
■
At least one lowercase letter
■
At least one number (0-9)
■
Uppercase letters and special characters can be
included, but they are not required.
The following describes password restrictions:
Dictionary words are considered weak passwords
■
and are not accepted.
The last seven passwords cannot be reused, and
■
the new password cannot be similar to previous
passwords.
Re-enter the new password for confirmation.
To assign a time zone to the appliance, click on the Time zone
drop-down box and select the appropriate region, country, and
time zone.
Initial configuration procedures 36