VERITAS NetBackup 5330 Configuration Manual page 54

Performing the initial configuration on a NetBackup 5330 appliance from the NetBackup Appliance Shell Menu
AdvancedDisk storage pool size in GB/TB [default size]:
AdvancedDisk diskpool name:
AdvancedDisk storage unit name:
MSDP storage pool size in GB/TB [default size]:
MSDP diskpool name:
MSDP storage unit name:
After you configure the storage partitions, a summary of the storage
configuration appears with the following prompt:
Do you want to edit the storage configuration? [yes, no]
Type yes to make any changes, or type no to keep the current configuration.
16
Change the default
Enter the
■ Main_Menu > Support > Maintenance
At the password prompt, enter the default
■
( ).
P@ssw0rd
At the
■
Maintenance
the password.
Type to return to the NetBackup Appliance Shell Menu.
■ Exit
For complete information about using the
see the NetBackup Appliance Commands Reference Guide.
17
After all appliances are configured and operational, you are ready to install
client software on the computers that you want to back up.
See "Downloading NetBackup client packages to a client from a NetBackup
Appliance" on page 56.
See "Installing NetBackup client software through CIFS and NFS shares"
on page 60.
user password as follows:
Maintenance
shell prompt, enter the
Initial configuration procedures
command.
user password
Maintenance
command to change
passwd
Support > Maintenance
54
command,