Loading Envelopes In Tray 1 - Xerox VersaLink B615 User Manual

- Load envelopes with the print-side up, flaps closed and down, and short edge going into the
printer.
Note
For envelopes to print correctly, load envelopes with the flaps open. In the print driver, select
Portrait, Landscape, or Rotated Landscape, as needed. To flip the images, select Rotate
Image 180 Degrees.
5. Adjust the width guides until they touch the edges of the envelopes.
6. The printer prompts you to verify the paper type, size, and color.
a) If the paper type, size, and color are correct, touch OK.
b) If the paper type, size, or color are incorrect, change the settings.
• To select a paper type, touch the current paper type, then from the list, select Envelope.
• To select a size, touch the current size setting, then from the list, select the size.
• To select an envelope color, touch the current paper color, then from the list, select the color.
c) To save the settings, touch OK.

Loading Envelopes in Tray 1

1. To remove the tray from the printer, pull out the tray until it stops. Lift the front of the tray slightly,
then pull it out.
® ®
Xerox VersaLink B605/B615 Multifunction Printer
User Guide
Paper and Media
6-19