Xerox VersaLink B615 User Manual page 38

Getting Started
from the router and connects to the network. The PBC is a moderately secure way to connect the
printer to the network. You do not need to enter any information to make the network connection.
• PIN (Personal Identification Number) automatically connects the printer to a wireless router using
a common PIN. The printer generates and prints a PIN for use in the setup process. When you enter
the PIN into the router, the router broadcasts network information using the PIN. When both devices
recognize the PIN, the router provides the security and configuration information to the printer, which
uses it to connect to the network.
Connecting to a WPS Wireless Network Using the PBC Method
To connect to a Wi-Fi Protected Setup (WPS) wireless network using the Push-Button Connection (PBC)
method:
Note
Before you install the device, ensure that the wireless router is configured properly and is connected to
the network.
1. At the printer control panel, press the Home button.
2. Touch Device > Connectivity > Wi-Fi.
3. If Wi-Fi is Off, turn it on.
a) To toggle Wi-Fi from Off to On, touch the Wi-Fi toggle button.
b) To activate your Wi-Fi setting changes, press the Home button.
c) At the prompt, touch Restart Now.
d) After the printer restarts, touch Device > Connectivity > Wi-Fi.
4. Touch Manual Setup.
5. Touch Wi-Fi Protected Setup (WPS).
Note
If Wi-Fi Protected Setup (WPS) is not visible, at the top of the screen, touch Manual Setup.
6. Touch PBC.
7. Touch OK.
8. On the wireless router, press the WPS button.
Note
If the wireless router does not have a physical PBC button, use your computer to select the virtual
button in the router control panel. For more information, refer to your router documentation.
The router broadcasts setup information for 120 seconds.
9. To activate your Wi-Fi setting changes, restart the printer.
a) Press the Home button.
b) At the prompt, touch Restart Now.
10. After the printer restarts, wait two minutes, then to get the network information that includes the
IP address, print a Configuration Report. For more information, refer to
Report.
11. At the printer control panel, press the Home button.
12. If Wi-Fi is Off, turn it on.
a) Touch Device > Connectivity > Wi-Fi.
b) To toggle Wi-Fi from Off to On, touch the Wi-Fi toggle button.
2-18
Printing the Configuration
® ®
Xerox VersaLink B605/B615 Multifunction Printer
User Guide