Xerox VersaLink B615 User Manual page 39

c) To activate your Wi-Fi setting changes, press the Home button.
d) At the prompt, touch Restart Now.
Note
The following steps can vary with different router manufacturers. For more information, refer to your
router documentation.
13. At your computer, open the wireless router control panel, then select Add WPS Client.
14. Select PIN Method. The wireless router control panel opens to a dialog box ready for the PIN number.
15. At the printer control panel, touch Device > Connectivity > Wi-Fi.
16. Touch Manual Setup.
17. Touch Wi-Fi Protected Setup (WPS).
Note
If Wi-Fi Protected Setup (WPS) is not visible, at the top of the screen, touch Manual Setup.
18. Touch PIN.
19. Record the PIN from the screen, then touch OK.
Note
The printer continues to advertise for 120 seconds. If the printer does not locate the wireless router
within 120 seconds, the connection attempt stops.
The printer starts advertising using the displayed PIN Code.
20. At your computer, in the wireless router control panel Client PIN Code field, enter the PIN code, then
click Next.
The printer communicates with the wireless router to resolve setup and configuration information.
When the printer has the correct information, it connects to the router and restarts with the proper
setup and configuration information.
If the router does not connect with the printer within 120 seconds, the connection attempt stops.
21. After the printer restarts, wait 20 seconds, then to get the network information that includes the IP
address, print a Configuration Report. For more information, refer to
Report.
Connecting to a WPS Wireless Network Using the PIN Method
To connect to a Wi-Fi Protected Setup (WPS) wireless network using the PIN method:
Note
Before you install the printer, ensure that you connect and configure the wireless router for the network.
1. At the printer control panel, press the Home button.
2. If Wi-Fi is Off, turn it on.
a) Touch Device > Connectivity > Wi-Fi.
b) To toggle Wi-Fi from Off to On, touch the Wi-Fi toggle button.
c) To activate your Wi-Fi setting changes, press the Home button.
d) At the prompt, touch Restart Now.
Note
The following steps can vary with different router manufacturers. For more information, refer
to your router documentation.
® ®
Xerox VersaLink B605/B615 Multifunction Printer
User Guide
Getting Started
Printing the Configuration
2-19