Connecting To A Wireless Network Manually - Xerox VersaLink B615 User Manual

Getting Started
3. At your computer, open the wireless router control panel, then select Add WPS Client.
4. Select PIN Method. The wireless router control panel opens to a dialog box ready for the PIN number.
5. At the printer control panel, touch Device > Connectivity > Wi-Fi.
6. Touch Manual Setup.
7. Touch Wi-Fi Protected Setup (WPS).
Note
If Wi-Fi Protected Setup (WPS) is not visible, at the top of the screen, touch Manual Setup.
8. Touch PIN.
9. Record the PIN from the screen, then touch OK.
The printer starts advertising using the displayed PIN Code.
Note
The printer continues to advertise for 120 seconds. If the printer does not locate the wireless router
within 120 seconds, the connection attempt stops.
10. At your computer, in the wireless router control panel Client PIN Code field, enter the PIN code, then
click Next.
The printer communicates with the wireless router to resolve setup and configuration information.
When the printer has the correct information, it connects to the router and restarts with the proper
setup and configuration information.
If the router does not connect with the printer within 120 seconds, the connection attempt stops.
11. After the printer restarts, wait 20 seconds, then to get the network information that includes the IP
address, print a Configuration Report. For more information, refer to
Report.

Connecting to a Wireless Network Manually

When connecting to a wireless network that does not include a WPS-compliant router, set up and
configure the printer manually. Before starting, obtain the router setup and configuration information,
such as name and passphrase. For assistance, contact your system administrator.
To connect to a wireless network manually:
1. At the printer control panel, press the Home button.
2. Touch Device > Connectivity > Wi-Fi.
3. If Wi-Fi is Off, turn it on.
a) To toggle Wi-Fi from Off to On, touch the Wi-Fi toggle button.
b) To activate your Wi-Fi setting changes, press the Home button.
c) At the prompt, touch Restart Now.
d) After the printer restarts, touch Device > Connectivity > Wi-Fi.
4. To connect to a network:
• Touch the name of the network, enter the password for the selected network, then touch OK.
• If the desired network does not appear, touch Manual Setup, then configure the wireless network
settings.
- For Enter the Network Name (SSID), type the name (SSID) of your network, then press OK.
2-20
Printing the Configuration
® ®
Xerox VersaLink B605/B615 Multifunction Printer
User Guide