Power Options - Xerox VersaLink B615 User Manual

Item Name
3 Power/Wake
4 Home Button
5 NFC Area
6 Status LED

Power Options

The Power/Wake button is a single multifunction button on the control panel.
• When used in conjunction with the main power switch, the Power/Wake button powers on the printer.
• If the printer is already powered on, you can use the Power/Wake button to:
® ®
Xerox VersaLink B605/B615 Multifunction Printer
User Guide
Description
This button serves several power-related functions.
• When the printer is off, this button powers on the printer.
• When the printer is on, pressing this button displays a menu on the control
panel. From this menu, you can choose to enter Sleep mode, restart, or
power off the printer.
• When the printer is on, but in a low-power or Sleep mode, pressing this
button wakes the printer.
• When the printer is powered on, holding this button for 5 seconds powers
off the printer.
This button also blinks to indicate the power status of the printer.
• When the light blinks slowly, the printer is in Low Power or Sleep mode.
• When the light blinks fast, the printer is powering down, or exiting a low-
power mode.
This button provides access to the Home menu for access to printer features.
Near Field Communication (NFC) is a technology that enables devices to
communicate when they are within 10 cm (4 in.) of each other. Use the NFC
area to obtain a network interface or to establish a TCP/IP connection
between your device and the printer.
This light blinks blue or amber to indicate printer status.
• Blue
- Blinks once slowy to acknowledge a successful Authentication request.
- Blinks once slowly for a Copy or Print job initiated at the control
panel.
- Blinks twice slowly for Fax or Print job received from the network.
- Blinks fast while the printer is powering up, or to signal detection of
a Wi-Fi Direct connection request.
• Amber
- Blinks to indicate an error condition or warning that requires your
attention. For example, an out-of-toner condition, a paper jam, or
out of paper for the current job.
- The printer status LED also blinks to indicate a system error, which
typically is associated with an error code.
Getting Started
2-5