Making A Copy - Xerox VersaLink B615 User Manual

®
Xerox Apps

Making a Copy

To make a copy:
1. At the printer control panel, press the Home button.
2. To clear previous App settings, touch Reset.
3. Load your original documents.
• Use the document glass for single pages or paper that cannot be fed using the single-pass duplex
automatic document feeder. Lift the document feeder, then place the original document face
down in the upper-left corner of the document glass.
• For single, multiple, or 2-sided pages, use the single-pass duplex automatic document feeder.
Remove any staples and paper clips from the pages. Insert the original documents face up in the
document feeder, with the top of the page entering the feeder first. Adjust the paper guides so
that they fit against the original documents.
4. Touch Copy, then enter the number of copies needed.
Note
To amend the number of copies entered, touch the X button, then enter the required quantity.
5. If scanning from 2-sided original documents, touch 2-Sided, then select an option.
6. Adjust copy settings as needed.
For details about available features, refer to
7. Touch Start. If you placed documents in the feeder, scanning continues until the feeder is empty.
8. If you are scanning from the document glass, when prompted, do one of the following:
4-16
Apps Feature.
Xerox ® VersaLink ® B605/B615 Multifunction Printer
User Guide