RL78/G22 Fast Prototyping Board
5.15
Power-Supply Selection Header
The operating power (VDD) of the evaluation MCU can be changed to supply from the emulator or external
power, and to 5 V or 3.3 V with the use of a header (J17). Only change the jumper setting of J17 while power
is not being supplied.
1-2 of J17 being short-circuit selects a 5-V power supply. This is the default setting as shipped (Figure
•
5-5).
2-3 of J17 being short-circuit selects a 3.3-V power supply (Figure 5-6).
•
J17 being open-circuit selects supply from the emulator or external power. (Figure 5-7).
•
Figure 5-5 Setting of the Header to Select a 5-V Power Supply (Top Side)
Figure 5-6 Setting of the Header to Select a 3.3-V Power Supply (Top Side)
R20UT5121EJ0100 Rev. 1.00
Nov.16.22
Power-supply
selection header (J17)
1-2 short-circuit:5 V
Power-supply
selection header (J17)
2-3 short-circuit:3.3 V
5. User Circuits
Page 21 of 35