To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
(press MODE and SELECT keys for one second)
MODE key
Simultaneously Press the " MODE
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
6EXAP FUNCTIONS
6EXAP FUNCTIONS
(Screen at Startup)
[Model 2-5]
[CH 2-5]
[CH 2-5]
[CH 2-3]
[CH 2-5]
MODE " and " SELECT
SELECT " keys and hold them down for one second to enter the programming
FLOW CHART
FLOW CHART
PCM mode onry
19
19
Stick Mode
Stick Mode
To change the Stick Mode, turn on
the transmitter holding MODE and
SELECT keys down simultaneously.
Use the DATA INPUT lever to display the
desired stick mode.
MODE key
SELECT key
DATA INPUT
lever