Table of Contents
Advertisement
Chapter 3
Avaya P330-ML Layer 3 CLI Commands
show device-mode
User level: user, privileged, supervisor
This command does not apply to the P333R-LB which is always in "Load
Balancing" mode.
Use the show device-mode command to show the current switch operating
mode. Possible modes are Router or Switch.
The syntax for this command is:
show device-mode
Example:
Router-N> show device mode
Device mode is router
show download status
User level: user, privileged, supervisor
This command applies the P330-ML-ML switches only.
Use the show download status command to display a summary of the last
software download operation.
The syntax for this command is:
show download status [slot]
Example:
P330-N>show download status 1
Module #1
===========
Module
Source file
Destination file : module-config
Host
Running state
Failure display
Last warning
Bytes Downloaded : 0
show erase status
User level: user, privileged, supervisor
Use the show erase status command to view the status of the erase
248
: 1
: c:\session4.txt
: 149.49.75.100
: Idle
: SCP - Server refused
: No-warning
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
