Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
snmp-server engineID <engineID>
engineID
Example:
P330-N>snmp-server engineID 1a:e9:00:00:01:95:31:8a:9d
P330-N>EngineID changed
P330-N>Done!
snmp-server group
User level: supervisor
Use the snmp-server group command to configure SNMPv3 groups.
The syntax for this command is:
snmp-server group <groupname> [v1 | v2c | v3 { noauth | auth |
priv }][read readview][write writeview] [notify notifyview]
groupname
v1, v2c, v3
noauth,
auth, priv
read
readview
write
writeview
202
A 5 - 32 byte string represented as hexadecimal numbers
separated by the colon character.
For example, 00:00:00:81:0a:fe:ff:12:97:33:45:12.
Variable that specifies the name of the SNMP group. The
maximum length is 32 bytes.
The security model assigned to the group.
Keywords that specifies the type of authentication.
• noauth – No authentication required.
• auth – Requires authentication with no encryption.
• priv – Requires authentication with encryption.
Keyword that specifies a view for SNMP get requests. If this
keyword is not included in the command, the group has no
associated read view.
The name of the view for SNMP get requests.
Keyword that specifies a view for SNMP set requests. If this
keyword is not included in the command, the group has no
associated write view.
The name of the view for SNMP set requests.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
