Table of Contents
Advertisement
Chapter 3
Avaya P330-ML Layer 3 CLI Commands
show ip reverse-arp
User level: user, privileged, supervisor
Use the show ip reverse-arp command to display the IP address of a host,
based on a known MAC address.
The syntax for this command is:
show ip reverse-arp <mac addr> [<match len>]
mac addr
match len
Example:
Router-N> sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address
--------------- ----------------- ----------- -------
149.49.70.68
show ip route
User level: user, privileged, supervisor
Use the show ip route command to display information about the IP unicast
routing table.
The syntax for this command is:
show ip route
Router-N> show ip route
Showing 2 rows
Network
--------------- --------------- ------------ --------------- ----- --- ---------
0.0.0.0
149.49.54.0
258
MAC address
The number of bytes in the address to match
MAC Address
00:10:a4:98:97:e0
Mask
Interface
0.0.0.0
net
255.255.255.0
net
I/F
Type
e-70
Dynamic
Next-Hop
Cost
TTL
149.49.54.1
1 n/a STAT-LO
149.49.54.56
1 n/a LOCAL
Avaya P330-ML Reference Guide
TTL
--------
14355
Source
Advertisement
Table of Contents
