Show Port Classification - Avaya P330-ML-ML Reference Manual

show port classification

User level: user, privileged, supervisor
Use the show port classification command to display a port's
classification.
The syntax for this command is:
show port classification [module/[port]]
module
port
(Optional)
Example:
P330-N>show port classification 4/8
Port
------ ---------------------
4/8
P330-N>show port classification 4/9
Port
------ ---------------------
4/9
Avaya P330-ML Reference Guide
Number of the switch. If you do not specify a
number, the ports on all the switches are shown.
Number of the port on the module. If you do not
specify a number, all the ports on the module are
shown.
You can also specify a range of ports separated by a
dash, for example, 4/5-13 for ports 5 to 13 on
module 4.
Port Classification
regular
Port Classification
valuable
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
161