Set Time Server; Set Timezone; Set Trunk - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

set time server

User level: read-write, admin.
Use the set time server command to set the TIME server address.
The syntax for this command is:
set time server <ip address>
ip address
Example:
P460-1# set time server 192.49.53.68
The Server Ip has been set to 192.49.53.68

set timezone

User level: read-write, admin.
Use the set timezone command to assign a timezone name and sets the time
difference of the device relative to the Coordinated Universal Time (UTC / GMT).
The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone <zone-name> [-]<hours>[:30]
zone-name
hours
Example:
P460-1# set timezone EST -5
Timezone set to "EST", offset from UTC is -5 hours.

set trunk

User level: read-write, admin.
Use the set trunk command to configure the VLAN tagging mode of a port.
set trunk <module/port> {off|dot1q}
module
116
IP address of the TIME server.
Three-character name of time zone, for example, EST, GMT
The difference between the time zone and GMT
Number of the module (3-6).
Avaya P460 Reference Guide