Reset; Router Ospf - Avaya P330-ML-ML Reference Manual

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
User level: privileged, supervisor.
Use the CLI prompt length command to set the length of the command prompt that
is displayed.
The syntax for this command is:
prompt-length <full | prompt-size>
full
prompt-size
Example:
Router-N> prompt-length 3
~N>

reset

User level: user, privileged, supervisor
Use the reset command to restart an individual switch.
The syntax for this command is:
reset
Example:
Router-N> reset
This command will force a switch-over to the master module
and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.

router ospf

User level: privileged, supervisor.
If you are at the "privileged" level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter interface mode.
Use the router ospf command to enable the OSPF protocol on the system and
enter the "router ospf" context.
Use the no router ospf command to disable the OSPF one the system.
240
return the CLI prompt to its full length
size of the CLI prompt in characters
Avaya P330-ML Reference Guide