Chapter 3
Avaya P330-ML Layer 3 CLI Commands
copy scp startup-config
User level: privileged, supervisor.
Use the copy scp startup-config command to download a startup
configuration to the device via SCP.
Only parameters that differ from the factory default settings for the switch are
included in the configuration file. Therefore, it is important to reinitialize the
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
The syntax for this command is:
copy scp startup-config <filename> <ip>
filename
ip
Example (for Windows):
P330-N# copy scp startup-config c:\P330-ML\startup.cfg
149.49.100.41
Example: (for Unix):
P330-N# copy scp startup-config /folder/P330-ML/
startup.cfg 149.49.100.41
copy startup-config scp
Use the copy startup-config scp command to upload the switch-level
startup configuration from the active bank into a file via SCP.
The syntax for this command is:
copy startup-config scp <filename> <ip> <mod_num>
filename
ip
mod-num
220
Source file name on the SCP server (full path).
The ip address of the SCP server.
The file name (full path)
The IP address of the SCP server
The switch number
Avaya P330-ML Reference Guide