Table of Contents
Advertisement
Example:
Router-N> show ip ospf neighbor
There are no ospf neighbors
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
show ip protocols
User level: user, privileged, supervisor
Use the show ip protocols command to display the IP routing protocol process
parameters and statistics.
The syntax for this command is:
show ip protocols [<protocol>]
protocol (Optional)
Example:
Router-N> show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushd after 300
Redistributing: rip
Default version control: rip version 1
Interface
Routing for Networks:
Routing Information Sources:
Gateway
Avaya P330-ML Reference Guide
Chapter 3
Avaya P330-ML Layer 3 CLI Commands
RIP | OSPF.
Last Update
Version
Key
257
Advertisement
Table of Contents
