Chapter 2
Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
no username <name>
name
Example:
P330-1(super)# no username john
User account removed.
If you wish to delete a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
You cannot delete the default user account "root".
nvram initialize
User level: privileged, supervisor.
Use the nvram initialize command to reset the configuration parameters to
their factory defaults.
The syntax for this command is:
nvram initialize {switch | all}
switch
all
Example:
P330-N# nvram initialize
This command will restore factory defaults, and can
disconnect your telnet session
*** Reset *** - do you want to continue (Y/N)? y
Connection closed by foreign host
ping
User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
You can use this command via the master switch only.
52
User name
Resets all the switching parameters (Layer 2 only) throughout
the stack
Resets all parameters including licenses and routing
parameters of the Layer 3 switches present in the stack
Avaya P330-ML Reference Guide