Table of Contents
Advertisement
show logging session condition
User level: user, privileged, supervisor
Use the show logging session condition command to display the condition
and filtering of logging in the current CLI session.
The syntax for this command is:
show logging session condition
Example:
P330-N>show logging session condition
*********************************************************
Message logging configuration of SESSION
Sink Is Enabled
Sink default severity: Error
Facility
-------------------------------------------
SUPPLY
Session source ip: 135.64.102.224
show logout
User level: user, privileged, supervisor
Use the show logout command to display the amount of time the CLI remains
idle before timing out in minutes.
If the result is 0, there is no timeout limit. The default is 15 minutes.
The syntax for this command is:
show logout
Example:
P330-N>show logout
CLI timeout is 10 minutes
show mac-aging
User level: user, privileged, supervisor
This command is available on P330-ML-ML switches only.
Avaya P330-ML Reference Guide
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
! Severity Override
! Warning
sink ***
155
Advertisement
Table of Contents
