Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N>no snmp-server host 149.49.38.221
Done!
no snmp-server notifications
User level: supervisor
Use the no snmp-server notifications command to disable all available
SNMP notifications.
The syntax for this command is:
no snmp-server notifications
Example:
P330-N# no snmp-server notifications
Done!
no snmp-server remote-user
User level: supervisor
Use the no snmp-server remote-user command to remove a remote user
configured to receive SNMP notifications.
The syntax for this command is:
no snmp-server remote-user <username> <engine-id>
username
engine-id
Example:
P330-1(super)# no snmp-server remote-user CharlieBrown
1a:e9:00:00:01:95:31:8a:9d
Done!
no snmp-server user
User level: supervisor
Use the no snmp-server user command to remove an SNMP user account.
50
Variable that specifies the name of the SNMP user. The
maximum length is 32 bytes.
The SNMP engine ID of the remote host.
Avaya P330-ML Reference Guide