Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
set port dot1x supp-timeout
User level: supervisor
Use the set port dot1x supp-timeout command to set the time for the port to
wait for a reply from the Authentication Server before the session is terminated.
The syntax for this command is:
set port dot1x supp-timeout <module/port> <seconds>
module/
port
seconds
Example:
P330-1(super)# set port dot1x supp-timeout 1/2 400
set port dot1x tx-period
User level: supervisor
Use the set port dot1x tx-period command to set the time interval between
attempts to access the Authenticated Station.
The syntax for this command is:
set port dot1x tx-period <module/port> <seconds>
module/
port
seconds
Example:
P330-1(super)# set port dot1x quiet-period 1/2 5000
set port duplex
User level: privileged, supervisor.
Use the set port duplex command to configure the duplex type of an Ethernet
or Fast Ethernet port or range of ports. You can configure Ethernet and Fast
Ethernet interfaces to either full duplex or half duplex.
90
Module and port number (or range of ports)
Number of seconds – 0 to 65535
Module and port number (or range of ports)
Number of seconds — 0-65535
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
