Table of Contents
Advertisement
Chapter 3
Avaya P330-ML Layer 3 CLI Commands
The syntax for this command is:
[no] ip ospf hello-interval <seconds>
seconds
Example:
Router-N(configure-if:marketing) # ip ospf hello-interval 5
Done!
ip ospf priority
User level: privileged, supervisor.
Use the ip ospf priority command to configure interface priority used in DR
election.
Use the no ip ospf priority to set the OSPF priority to its default value.
The default is 1.
The syntax for this command is:
[no] ip ospf priority <priority>
priority
Example:
Router-N(configure-if:marketing) # ip ospf priority 17
Done!
ip proxy-arp
User level: privileged, supervisor.
Use the ip proxy-arp command to enable proxy ARP on an interface.
Use the no ip proxy-arp command to disable proxy ARP on an interface.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
Router-N(config-if:marketing)#no ip proxy arp
280
integer
integer
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
