Table of Contents
Advertisement
show port auto-negotiation-flowcontrol-advertisement
User level: privileged, supervisor.
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement
[mod_num/port_num]
mod_num
(optional)
port_num
(optional)
Example:
P330-N>show port auto-negotiation-flowcontrol-
advertisement
Port 1/1
Port 1/2
Port 1/3
show port channel
User level: user, privileged, supervisor
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]] [info]
mod_num
(Optional)
port_num
(Optional)
info (Optional)
Avaya P330-ML Reference Guide
Chapter 2
Number of the switch
Number of the port
advertises no flow control capabilities.
advertises no flow control capabilities.
advertises no flow control capabilities.
Number of the switch. If you do not specify a number, the
modules on all the switches are shown.
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Display port information
Avaya P330-ML Layer 2 CLI Commands
159
Advertisement
Table of Contents
