Package Contents - Intek Elite 16D Installation & Programming Manual

This Elite 16D alarm control panel has been designed to provide the most requested features for both the installer &
the end-user. These features include ease of installation, ease of programming and user friendly operation all in a
package which is reliable, functional and attractive.
Utilising many years of experience in the security industry and implementing valuable feedback, we are proud to
provide you with a new generation of alarm controller. The Elite 16D is a New Zealand designed and built product
which brings you the quality and features which you deserve at an affordable price. In addition to the the advanced
design, only the highest quality components have been used in the production of this Elite 16D panel to ensure the
highest degree of reliability.
This manual will guide you through the installation and programming of your Elite 16D alarm panel. For additional
information regarding the operation instructions and options, please refer to the enclosed "Elite 16D User's Guide".
This Elite 16D package should contain the following items;
1 x Elite controller PCB
1 x Elite new generation backlit keypad
1 x Elite keypad zone list
1 x Elite 16D Users Guide
1 x Elite cabinet & lid
1 x 17 volt 1.4a Telepermitted mains transformer
1 x Cabinet hardware accessory pack including,
1 x
1 x
1 x
1 x
1 x
1 x
2 x
10 x
10 x
10 x
Elite installation & programming guide
Spare 1.5a fuse
Cabinet tamper switch
Cabinet tamper bracket
Tamper switch wire set
Battery lead set
Cabinet lid screws
2k2 (red, red, red) end of line resistors
4k7 (yellow, purple, red) end of line resistors
8k2 (grey, red, red) end of line resistors
Page 5