Start Event Printing - Intek Elite 16D Installation & Programming Manual

P722E Active Outputs - This option will cause the keypad to display the outputs which are currently
turned on, i.e.active
P723E Display keyboard address - This option will cause the keypad you are operating to display it's
address from 1-8. This feature is only available in installer program mode.
P724E Display partitions assigned to this keypad - This option will cause the keypad you are
operating to display the Areas to which it has been assigned permissions.
P725E Display software version - This address will cause the panel software version to be flashed
back at the keypad.
P726E Start Event Printing - The alarm system stores the last 63 events in a printer buffer. These
events include time, date and an event description.
Arrowhead serial card is plugged into the panel and connected to a printer with a RS232 input,
a user with permission to print (e.g. P49-P72 option 4) enters client program mode (P-code-E,
program LED on solid), then enters P726E which will send the buffer data to the printer.
Page 39
To print the events, assuming the